Electrical discharge machining

This article is licensed under theGNU Free Documentation License.It uses material from the Wikipedia article 'Electrical discharge machining' (click for full Wikipedia text)

 'Electrical discharge machining ' (or  'EDM ') is a machining method primarily used for hard metals or those that would be impossible to machine with traditional techniques. One critical limitation, however, is that EDM only works with materials that are electrically conductive. EDM can cut small or odd-shaped angles, intricate contours or cavities in extremely hard steel and exotic metals such as titanium, hastelloy, kovar, inconel and carbide. Sometimes referred to as  'spark machining ' or  'spark eroding ', EDM is a nontraditional method of removing material by a series of rapidly recurring electric arcing discharges between an electrode (the cutting tool) and the work piece, in the presence of an energetic electric field. The EDM cutting tool is guided along the desired path very close to the work but it does not touch the piece. Consecutive sparks produce a series of micro-craters on the work piece and remove material along the cutting path by melting and vaporization. The particles are washed away by the continuously flushing cutting fluid. There are two main types of EDM machines, ram and wire-cut.

Ram EDM

Prototype production

The EDM process is most widely used by the mold-making tool and Die (manufacturing) industries, but is becoming a common method of making prototype and production parts, especially in the aerospace and electronics industries in which production quantities are relatively low. In ram EDM, a graphite or beryllium copper electrode is machined into the desired (negative) shape and fed into the workpiece on the end of a vertical ram.

Coinage die making

For the creation of dies for producing jewelry and badges by the coinage (stamping) process, the positive master may be made from sterling silver, since (with appropriate machine settings) the master is not significantly eroded and is used only once. The resultant negative die is then hardened and used in a drop hammer to produce stamped flats from cutout sheet blanks of bronze, silver, or low proof gold alloy. For badges these flats may be further shaped to a curved surface by another die. This type of EDM is usually performed submerged in an oil-based dielectric. The finished object may be further refined by hard (glass) or soft (paint) enameling and/or electroplated with pure gold or nickel. Softer materials such as silver may be hand engraved as a refinement.

Wire-cut EDM

In Wire-cut EDM, a thin single-strand metal wire, usually brass, is fed through the workpiece. The wire, which is constantly fed from a spool, is held between upper and lower guides. The guides move in the  x – y  plane, and sometimes the upper guide can also move independently giving rise to transitioning shapes (circle on the bottom square at the top). This gives the wire-cut EDM the ability to be programmed to cut very intricate and delicate shapes. The wire-cut uses water as its dielectric with the water's resistivity and other electrical properties carefully controlled by filters and Ion units.

See also

• Electro chemical machining
  
  This article is licensed under the GNU Free Documentation License.It uses material from the Wikipedia article 'Electrical discharge machining' (click for full Wikipedia text) Hide